S-tech’s Emergency/Sensor LED Batten has a built-in microwave sensor and is combined with emergency back up.
Don’t need the microwave sensor, that’s no problem as the microwave is fitted as an option to enable or not, it’s your choice. We have simplified the operation of the sensor by no longer needing a remote to change the settings, the sensor comes with dip switches to change the settings as required.
This maintained emergency batten uses the latest in battery technology and charging controllers to ensure that you have light available in the critical time when there is a power cut.
Model: SMD-2FT-3C-ME
Features:
- Maintained Emergency Fitting with Microwave Sensor
- 3 colours in one: 4000K, 5000K, 6000K (switch select)
- Built-In microwave sensor with 3-step dimming function (on-dim-off)
- Sensor settings are set via dip switch (no remote needed)
- 2241~2286lm
- Centre or side cable entry
- 20mm knock-outs for continuous fixing
- Input: 220~240VAC
- 120°Beam Angle
- Polycarbonate opal diffuser
- Powdercoated steel base
- IP20 housing
- Dimensions: 600 x 65 x 60mm
Default factory settings:
CCT: 4000K
Sensor: Detection Area: 100%, Hold Time: 60 seconds, Daylight Sensor: Disabled, Standby DIM Level: 20%, Standby Period: Infinity
What this means? The light will be at 20% brightness day and night and once motion detected the light will be on at 100% for 60 seconds (movement resets this timer). If you don’t like these settings then there are a number of other settings available, just download the specification sheet for more options.
